실시간인기검색어
 

 1. 일반체인
 2. 합금강체인
 3-1. 스텐로프 휀스
 3. 와이어로프
 4. 섬유로프
 5. 호이스트
 6. 윈치
 7. 타이어체인
 8. 후크부속류
 9. 로프부속류
 10. 슬링
 11. 샤클.턴버클
 12. 크램프
 13. 리프트
 14. 제품 전체보기

 

  저작권 등록증

호안블럭체인

  호안블럭체인
 호안블럭연결체인,호안블럭체인,호안브럭연결체인,호안브럭체인,신생호안블럭용체인

오성산업 > 7. 타이어체인 > 특수체인 6스틸체인 상세보기

  6스틸체인

영문이름

:

 truck chain

상품코드

:

 507402

:

 osc

:

 7._타이어체인/특수체인

  

5스틸체인

8각종특수...

7스틸체인

9각종특수...

1넷체인(승...

2넷 체인▶...

3우레탄체...

4우레탄체...

6스틸체인  

1. Passenger Car Chains

(P-Regular & RP-Reinforced Type) (SAE class "U" or "W")

2. Passenger Car Chains

(PL-Type) (SAE class "S")

3. Single Truck Chains

(SH-Regular & RS-Reinforced Type) (SAE class "U" or "W")

4. Single Truck Chains

MUD Service(SM-Regular Type) (SAE class "W")

5. Dual Triple Truck Chains

(DTH-Regular & RDT-Reinforced Type) (SAE class "U" or "W")

6. Dual Triple Truck Chains

MUD Service(DTM-Type) (SAE class "W")

7. Dual & Wide Base Truck Chains

(DH-Type) (Single & Dual mount-SAE class "W")

8. OFF-THE-ROAD Vehicle Chains

(ORT-Type) (Single mount-SAE class "NOT" Applicable)

9. Farm Tractor Chains

(FTH-Type) (Single mount-SAE class "NOT" Applicable)

10. Cross Chains

Ladder & Garden Tractor Cross Chains

11. Tire Chain Specifications

(No. NACM-92805 TC)

1. Passenger Car Chains (P-Regular & RP-Reinforced Type) (SAE class "U" or class "W")

item No.

Side Chain

Cross Chain

Hooks

Application

Length

Dia

Dia

Links

Length

Pairs

Dia

P1206

1412

4.5

5.26

7

258.6

10

5.26

 

RP1806

4.88

P1207

1539

4.5

5.26

7

258.6

11

5.26

 

RP1807

4.88

P1217

1603

4.5

5.26

7

258.6

11

5.26

 

RP1817

4.88

P1210

1697

4.5

5.26

7

258.6

12

5.26

 

RP1810

4.88

P1230

1560

4.88

5.26

9

305.3

11

5.26

 

RP1830

P1240

1692

4.88

5.26

9

305.3

12

5.26

 

RP1840

P1254

1692

4.88

5.26

10

328.7

12

5.26

 

RP1854

P1255

1791

4.88

5.26

10

328.7

13

5.26

 

RP1855

P1250

1857

4.88

5.26

10

328.7

13

5.26

 

RP1850

P1284

1935

5.54

5.94

9

307.8

13

6.35

 

RP1884

 

2. Passenger Car Chains (PL-Type) (SAE class "S")

item No.

Side Chain

Cross Chain

Hooks

Application

Length

Dia

Dia

Links

Length

Pairs

Dia

PL1110

1201

4.11

4.5

7

263.7

9

4.5

 

PL1114

1349

4.11

4.5

7

263.7

10

4.5

145-13, 145/65-15, 145/70-14, 145/80-13, 155-12, 155-13, 155/65-14, 155/60-15, 155/70-13, 155/80-12, 155/80-13, 165/50-15, 165/60-13, 165/60-14, 165/65-13, 165/65-14, 165/70-12, 165/70-13, 165/75-13, 175/50-13, 175/60-13, 175/65-13, 175/70-12, 160-13,

PL1118

1483

4.11

4.5

7

263.7

11

4.5

135-15, 145-15, 145/70-15, 145/80-15, 155/70-14, 155/70-15, 165-13, 165/65-14, 165/70-14, 165/70-360, 165/70-365, 165/75-14, 165/80-13, 165/80-14, 175/60-14, 175/65-14, 175/70-13, 175/75-13, 185/50-15, 185/55-14, 185/60-13, 185/65-13, 185/70-13,

PL1122

1610

4.11

4.5

7

263.7

12

4.5

155-15, 155/80-15, 155/80-16, 165-14, 165-15, 165/65-15, 165/70-15, 165/80-15, 175-13, 175-14, 175/70-15, 175/75-14, 175/75-15, 175/80-13, 175/80-14, 185/55-15, 185/60-14, 180/65-15, 185/75-14, 185/80-13, 195/45-15, 195/55-15, 195/65-13,

PL1126

1483

4.11

4.5

8

293.6

11

4.5

195/60-13, 185/60-14, 195/70-13, 205/60-13, 175/70-14, 185/65-14, 195/55-14, 195/60-14, 185/55-15, 185/60-15, 195/50-15, 185/70-14, 195/65-14, 205/60-14, 185/65-15, 185/75-13, 215/50-13, 215/60-13, 205/55-14, 220/45-15, 185/65-365, 180/65-390, 185/65-390, 185-13,

PL1130

1618

4.11

4.5

8

293.6

12

4.5

195/45-16, 195/60-15, 205/50-15, 215/50-15, 195/50-16, 205/45-16, 205/70-13, 185/80-14, 195/70-14, 205/65-14, 185/70-15, 185/75-15, 195/65-15, 195/60-16, 205/70-14, 215/60-14, 225/60-14, 195/70-15, 195/65-16, 195/75-14, 185/85-13, 195/75-13, 215/65-13, 215/65-14, 190/65-15, 195/50-16, 185/70-365, 190/65-390, 200/60-390, 195-13, 185-14, 175-15,

PL1134

1603

4.11

4.5

9

323.6

12

4.5

185-15, 195-14, 205-14, 205-16, 27x8.5-14, 195/75-15, 195/80-15, 205/45-17, 205/50-16, 205/50-17, 205/50-17, 205/55-15, 205/55-16, 205/55-16, 205/60-5, 205/60-16, 205/65-15, 205/70-15, 205/75-14, 215/45-16, 215/45-17, 215/50-16, 215/55-15, 215/55-16, 215/60-15, 215/60-16, 215/65-15, 215/70-14, 215/75-14, 220/55-390, 225/45-16, 225/50-15, 225/55-14, 225/55-15, 225/65-14, 235/50-13, 235/50-16, 235/55-16, 235/60-13, 235/60-14, 245/45-16, 245/50-13, 245/50-14

PL1138

1737

4.11

4.5

9

323.6

13

4.5

205-15, 215-14, 225-14, 27x8.5-15, 205/60-16, 205/65-16, 205/70-16, 205/75-15, 215/55-17, 215/60-16, 215/65-16, 215/65-17, 215/70-15, 215/70-16, 215/75-15, 215/75-16, 220/65-390, 225/40-18, 225/45-17, 225/45-18, 225/50-17, 225/55-16, 225/55-17, 225/60-15, 225/60-16, 225/60-16, 225/65-15, 225/65-16, 225/70-14, 225/70-15, 225/75-14, 235/45-17, 235/60-15, 235/65-15, 235/65-16, 235/70-14, 235/75-14, 245/40-17, 245/45-17, 245/50-15, 245/60-14, 255/55R14, 255/60-14, 265/50-14, 285/40-15

PL1142

1753

4.11

4.5

10

353.6

13

4.5

235-15, 205/80-16, 215/60-17, 225/60-17, 225/60-18, 225/65-17, 225/75-15, 225/75-16, 225/80-15, 235/50-18, 235/55-17, 235/55-18, 235/60-16, 235/70-15, 235/75-14, 235/75-15, 245/35-20, 245/40-19, 245/40-18, 245/45-18, 245/50-16, 245/50-17, 245/50-18, 245/50-16, 245/50-17, 245/55-16, 245/60-15, 245/60-16, 245/70-14, 245/70-15, 255/45-17, 255/45-17, 255/45-18, 255/50-16, 255/50-16, 255/55-15, 255/60-15, 255/65-15, 265/50-15, 265/50-16, 265/60-14, 265/60-15, 275/35-18, 275/40-17, 275/40-17, 275/50-15, 275/60-14, 275/70-16, 285/35-17, 295/50-15, 315/35-17

 

3. Single Truck Chains (SH-Regular & RS-Reinforced Type) (SAE class "U" or class "W")

item No.

Side Chain

Cross Chain

Hooks

Application

Length

Dia

Dia

Links

Length

Pairs

Dia

SH2201

1687

5.54

5.94

8

282.4

11

6.35

 

RS2801

SH2203

1864

5.54

5.94

8

282.4

12

6.35

 

RS2803

SH2206

1943

5.54

5.94

8

282.4

13

6.35

 

RS2806

SH2209

1641

5.54

5.94

9

307.8

11

6.35

 

RS2809

SH2211

1935

5.54

5.94

9

307.8

13

6.35

 

RS2811

SH2216

1811

5.54

5.94

10

333.2

12

6.35

195/75-16, 205/75-16, 205-16, 215/65-16, 215/70-16, 215/75-16, 215/75-14LT, 215/75-15, 215/75-15LT, 225/70-16, 225/70-14, 225/70-15, 225/75-15, 235/60-16, 235/60-18, 235/65-17, 235/70-15, 245/60-15, 255/75-16, 255/75-16LT, 28x8.5-15, 29x9.5-14, 6.50-16LT, 7.00-15, 8.00-16.5, H78-15LT, 225/75R16, 235/65R17

RS2816

SH2219

1969

5.54

5.94

10

333.2

13

6.35

205/75-17.5, 215/70-17.5, 215/80-16LT, 215/85-16LT, 225/65-18, 225/75-16LT, 235/55-17, 235/65-18, 235/70-17LT, 235/75-15, 235/75-15LT, 235/75-16LT, 245/70-15LT, 245/70-16LT, 245/75-17.5, 245/75-15LT, 255/65-16LT, 7.00-15TR, 7.00-16LT, 7.50-15LT, 8.50-17.5, 8.75-16.5, 8-17.5, 235/50-18, 255/45-18

RS2819

SH2221

2055

5.54

5.94

10

333.2

14

6.35

215/75-17.5, 225/70-19.5, 225/75-17.5, 235/80-17, 235/85-16LT, 245/75-16LT, 275/60-15LT, 7.00-17LT, 7.50-15TR, 7.50-16LT, 9.5-16.5, LR78-16LT, NR78-15, 245/75-16

RS2821

SH2214

2189

5.54

5.94

10

333.2

15

6.35

225/70-17.5, 245/70-17LT, 7.00-18, 7.50-17, 8-19.5

RS2814

SH2229

1836

5.54

5.94

12

384

12

6.35

10-16.5, 205/80-16, 225/55-18, 235/70-14, 235/70-16LT, 235/80-16, 245/65-17, 245/70-15, 245/70-16, 255/55-17, 255/55-18, 255/60-15, 255/60-18, 255/65-16, 255/70-15, 255/70-16LT 255/75-15LT, 265/50-16LT, 265/60-15, 265/60-16LT, 275/60-15, 275/60-16LT, 27x9.5-15, 295/50-15, 29x9.50-15, 30x9.50x15LT, 30x9.5-16, 31x11.5-16, 32x10.00-16LT, 32x9-16LT, 235/70-16, 245/55-17, 245/65-15, 245/65-17, 245/70-17, 255/60-17, 255/65-17, 255/70-16, 275/60-16, 275/60-17

RS2829

SH2228

2101

5.54

5.94

12

384

14

6.35

225/85-16, 235/80R17, 245/70-17.5, 245/70-19.5 245/85-15, 245/85-16, 255/85-16LT, 265/70-17LT, 265/75-16LT, 265/75-17, 265/85-16, 275/60-20, 275/60-17LT, 285/70-15, 8.25-15TR, 8.25-16, 265/70-17, 265/75-16, 275/70-16

RS2828

SH2233

2192

7.14

7.14

9

365

11

7.92

6.5-20, 7.00-20, 7.50-18

RS2833

SH2237

2332

7.14

7.14

9

365

12

7.92

10-17.5, 225/70-22.5, 235/80-22.5, 7.50-20, 8.25-17, 8.75-16, 8-22.5, 9.00-15TR, 9.00-16LT, 9-17.5

RS2837

SH2239

2510

7.14

7.14

9

365

13

7.92

10.00-15TR, 11-17.5, 245/70-22.5, 245/75-22.5, 245/80-22.5, 255/70-22.5, 255/80-22.5, 8.25-20, 9-22.5, QR78-16

RS2839

SH2241

2705

7.14

7.14

9

365

14

7.92

10.5-20, 10-22.5, 265/70-19.5, 265/75-22.5,
9.00-20

RS2841

SH2245

2878

7.14

7.14

9

365

15

7.92

10.00-20, 11-22.5, 275/70-22.5, 275/80-22.5

RS2845

SH2249

2936

7.14

7.14

10

396.7

15

7.92

10.00-22, 11-24.5, 285/80-24.5

RS2849

SH2251

2896

7.92

7.92

9

406.7

14

9.53

11.00-15TR, 11.00-20, 12.5-22.5, 12-22.5, 295/80-22.5, 315/75-22.5

RS2851

SH2253

3188

7.92

7.92

9

406.7

16

9.53

11.00-24

RS2853

SH2255

2944

7.92

7.92

10

442

14

9.53

11.00-22, 12.00-20, 12-24.5, 13/80-20, 305/75-24.5, 315/75-24.5, 315/80-22.5

RS2855

SH2257

3259

7.92

7.92

10

442

16

9.53

12.00-24, 13.00-20, 14/80-20, 365/80-20

RS2857

SH2271

3345

7.92

7.92

11

477.3

16

9.53

13.00-24, 14.00-20

RS2871

SH2273

3663

7.92

7.92

11

477.3

18

9.53

14.00-24

RS2873

 

4. Single Truck Chains -MUD Service(SM-Regular Type) (SAE class "W")

item No.

Side Chain

Cross Chain

Hooks

Application

Length

Dia

Dia

Links

Length

Pairs

Dia

SM2433

1666

7.14

7.92

8

371.3

8

9.53

6.50-16LT

SM2435

1849

7.14

7.92

8

371.3

9

9.53

7.00-15TR, 7.00-16LT, 7.50-15LT, 7.50-15TR, 8.75-16, 8.75-16.5, 8-17.5, 9.00-15TR, 215/70-17.5, 215/85-16LT, 225/75-16LT, 235/70-16LT, 235/75-15, 235/75-15LT, 245/70-16LT

SM2437

2014

7.14

7.92

8

371.3

10

9.53

7.00-17LT, 7.50-16LT, LR78-16LT, NR78-15, 215/75-17.5, 235/80-17, 235/85-16LT, 245/70-15, 255/65-15LT, 255/70-15, 265/75-15LT, 275/60-15, 275/60-15LT, 30x9.50x15LT

SM2439

1961

7.14

7.92

9

406.7

10

9.53

7.00-18, 7.50-17, 8-19.5, 225/70-17.5, 225/70-19.5, 245/70-19.5, 245/75-16LT, 33x10.5-15

SM2441

2258

7.92

9.53

11

440.9

11

9.53

7.50-20, 8.25-20, 9-22.5, 10.00-15LT, 10.00-15TR, 235/75-17.5, 235/80-22.5, 245/75-22.5, 255/70-22.5, 255/80-22.5, 315/75-16LT

SM2445

2466

7.92

9.53

11

440.9

12

9.53

9.00-20, 10-22.5, 265/75-22.5

SM2448

2639

7.92

9.53

11

440.9

13

9.53

10.00-20, 11-22.5, 275/70-22.5

SM2452

2799

7.92

9.53

11

440.9

14

9.53

10.00-22, 11.00-20, 11-24.5, 11.5-20, 12-22.5, 275/80-22.5, 275/80-24.5, 285/75-24.5, 295/75-22.5, 305/85-22.5

SM2470

2799

7.92

9.53

11

440.9

 

9.53

11.00-24, 295/80-22.5

SM2486

2799

7.92

9.53

11

440.9

 

9.53

11.00-22, 12.00-20, 12-24.5, 13/80-20, 315/80-22.5

 

5. Dual Triple Truck Chains (DTH-Regular & RDT-Reinforced Type) (SAE class "U" or class "W")

item No.

Side Chain

Cross Chain

Hooks

Application

Length

Dia

Dia

Links

Length

Pairs

Dia

DTH4206

1943

5.54

5.94

8

282.4

26

6.35

 

RDT4806

DTH4211

1900

5.54

5.94

9

307.8

26

6.35

 

RDT4811

DTH4217

1740

5.54

5.94

10

333.2

24

6.35

 

RDT4817

DTH4219

1969

5.54

5.94

10

333.2

26

6.35

215/70-17.5, 215/80-16LT, 215/85-16LT, 225/65-18, 225/75-16LT, 235/55-17, 235/65-18, 235/70-17LT, 235/75-15, 235/75-15LT, 235/75-16LT, 245/70-15LT, 245/70-16LT, 245/75-15LT, 255/65-16LT, 7.00-15TR, 7.00-16LT, 7.50-15LT, 8.50-17.5, 8.75R16.5, 8-17.5, 235/50-18, 255/45-18

RDT4819

DTH4221

2055

5.54

5.94

10

333.2

28

6.35

215/75-17.5, 225/70-19.5, 235/85-16LT, 245/75-16LT 275/60-15LT, 7.00-17LT, 7.50-15TR, 7.50-16LT, 9.5-16.5, LR78-16LT, NR78-15, 245/75-16

RDT4821

DTH4214

2189

5.54

5.94

10

333.2

30

6.35

 

RDT4814

DTH4231

2047

5.54

5.94

12

384

28

6.35

 

RDT4831

DTH4233

2192

7.14

7.14

9

365

22

7.92

 

RDT4833

DTH4222

2332

7.14

7.14

9

365

24

7.92

 

RDT4822

DTH4239

2510

7.14

7.14

9

365

26

7.92

10.00-15TR, 11-17.5, 245/70-22.5, 245/75R22.5, 245/80-22.5, 255/70R22.5, 255/80R22.5, 8.25-20, 9-22.5, QR78-16

RDT4839

DTH4241

2705

7.14

7.14

9

365

28

7.92

10.5-20, 10-22.5, 265/70-19.5, 265/75R22.5, 9.00-20

RDT4841

DTH4245

2878

7.14

7.14

9

365

30

7.92

10.00-20, 11-22.5, 275/70R22.5, 275/80R22.5

RDT4845

DTH4249

2936

7.14

7.14

10

396.7

30

7.92

10.00-22, 11-24.5, 285/80-24.5

RDT4849

DTH4251

2896

7.92

7.92

9

406.7

28

9.53

11.00-15TR, 11.00-20, 12-22.5, 295/80R22.5, 315/75-22.5

RDT4851

DTH4253

3188

7.92

7.92

9

406.7

32

9.53

 

RDT4853

DTH4255

2944

7.92

7.92

10

442

28

9.53

12.00-20, 13/80R20, 11.00-20, 13-22.5, 315/80R22.5, 12-24.5, 305/75R24.5, 315/75R24.5

RDT4855

DTH4257

3259

7.92

7.92

10

442

32

9.53

 

RDT4857

DTH4271

3345

7.92

7.92

11

477.3

32

9.53

 

RDT4871

DTH4273

3663

7.92

7.92

11

477.3

36

9.53

 

RDT4873

 

6. Dual Triple Truck Chains - MUD Service(DTM-Type) (SAE class "W")

item No.

Side Chain

Cross Chain

Hooks

Application

Length

Dia

Dia

Links

Length

Pairs

Dia

DTM4435

2258

7.92

9.53

11

440.9

22

9.53

7.00-16LT, 7.50-20, 8.25-20, 8.75-16, 9-22.5, 10.00-15LT, 10.00-15TR, 235/75-17.5, 235/75R15, 235/80R22.5, 245/75R22.5, 255/70R22.5, 255/80R22.5

DTM4437

2466

7.92

9.53

11

440.9

24

9.53

9.00-20, 10-22.5, 265/75R22.5, 275/80R22.5

DTM4448

2639

7.92

9.53

11

440.9

26

9.53

10.00-20, 11-22.5, 275/70R22.5

DTM4461

2799

7.92

9.53

11

440.9

28

9.53

10.00-22, 11.00-20, 11-24.5, 12-22.5, 275/80R24.5, 285/75R24.5, 295/75R22.5

 

7. Dual & Wide Base Truck Chains - (DH-Type) (Single & Dual mount-SAE class "W")

item No.

Side Chain

Cross Chain

Hooks

Application

Length

Dia

Dia

Links

Length

Pairs

Dia

DH3210

1941

5.54

5.94

12

384

13

6.35

10.00-15LT, 235/75-17.5, 245/75R17LT, 245/85R16LT, 255/60R17LT, 265/65R17, 265/70R15, 265/70R15LT, 265/70R16LT, P265/70R16 265/75R15, 265/75R15LT, 265/80R16LT, 275/55R17, 275/55R18, 275/65R17, 275/70R16LT, 295/50R16LT, 29x10.5-15, 305/50R15, 30x9.5-16.5, 31x10.5-15LT, 31x10.5-16, 31x10.5-17, 33x10.5-15 8.25-15LT, P235/70R17, P255/70R17, P265/70R17, P265/75R16

DH3227

1946

7.14

7.14

10

396.7

10

7.92

10-17.5, 11-15LT, 12-16.5LT, 235/85R16LT, 255/70R17LT, 255/75R16LT, 265/50R20, 265/60R18, 265/65R17, 265/70R16LT, 265/70R17LT, 275/45R20, 275/65R16LT, 275/70R16LT, 285/60R16LT, 285/70R15, 31x10.5-15LT, 31x10.5-16.5, 31x10.5-16.5LT, 31x11.5-15LT

DH3229

1966

7.14

7.14

12

460.2

10

7.92

10.50/80-18, 11L16, 12-15LT, 275/55R20, 275/65R20LT, 275/70R17, 285/70R16LT, 285/55R20, 285/70R17, 285/75R16LT, 285/75R17LT, 295/70R17LT, 295/75R16LT, 305/50R20, 305/55-20, 305/70R16LT, 305/85R16LT, 315/70R15, 315/75R16LT, 31x13.50-15, 325/60R15, 325/60R18, 32x12.5-16.5, 32x12.5x15, 33x10.5-15, 33x12.50R15, 33x12.5-16.5, 33x12.5-17, 33x14.5-15, 33x14.5-15, 33x14x15, 33x15.5-16.5, 35x12.5-15, 35x13.5-15, 35x13.5-16, 36x13-16

DH3235

2316

7.14

7.14

12

460.2

12

7.92

14-17.5, 275/70R18, 285/70-19.5, 355/70R17LT, 35x10.5x18, 35x12.5-16, 35x14-15, 35x14-16, 36.5x14-16, 36x12.5-15, 36x12.5-16.5, 36x13.5-16, 36x14-16.5, 37x12.5-15, 37x12.5-17, 37x12.5x16.5, 37x13.5-15, 38x15.5R16.5, 38.5x15-16.5

DH3237

1854

7.14

7.14

16

587.2

9

7.92

35x15.5-15, 35x15-15, 35x16x15, 365/65R16LT, 36x14.50R15, 38.5x14.5-15, 38.5x15-15

DH3249

1798

7.14

7.14

17

619

9

7.92

35x14.5-15, 38.5x16-16.5

DH3251

1974

7.14

7.14

17

619

10

7.92

325/80R16, 32x14.5-16.5, 355/65R18, 36x14-15, 37x13.50-20, 37x13.50-22, 37x14.5-15, 37x14.5-16.5, 38x14.5-16, 39.5x15-15, 39.5x15-16.5, 40x17-15, 40x17-16.5

DH3255

2697

7.14

7.92

13

547.9

14

9.53

13-22.5, 15-22.5, 16.5-19.5, 355/80R20, 385/65R22.5

DH3257

2870

7.14

7.92

13

547.9

15

9.53

18-19.5

DH3259

2156

7.14

7.92

14

583.2

11

9.53

355/60R20, 38x12.5-15, 38x13.5-20, 38x14.5-15, 42x15-16.5

DH3261

3043

7.14

7.92

14

583.2

16

9.53

18-22.5, 19-22.5, 445/65-22.5, 19.5-19.5, 395/85-20

DH3265

2233

7.14

7.92

15

618.5

11

9.53

15-19.5, 38.5x16-15, 38.5x16-16, 38x15.5-18, 38x15.5-20, 38x15-16, 39.5x15-16, 39.5x18-16.5, 39.5x18x15

DH3267

2339

7.14

7.92

15

618.5

12

9.53

 

DH3269

2566

7.14

7.92

15

618.5

13

9.53

445/50-22.5, 44x18.5-16.5, 455/55-22.5

DH3271

2715

7.14

7.92

15

618.5

14

9.53

16.5-22.5, 425/55-22.5, 425/65-22.5, 425/70-22.5, 445/65-19.5

DH3273

2299

7.14

7.92

20

795

12

9.53

 

DH3275

2535

7.14

7.92

20

795

13

9.53

 

DH3277

2710

7.14

7.92

20

795

14

9.53

 
 

8. OFF-THE-ROAD Vehicle Chains - (ORT-Type) (Single mount-SAE class "NOT" Applicable)

item No.

Side Chain

Cross Chain

Hooks

Application

Length

Dia

Dia

Links

Length

Pairs

Dia

OTR2612

2911

7.92

9.53

17

635

14

10.3

13.00-24, 13.00-25, 14.00-20, 14.00-21, 15.5-25

OTR2615

3203

7.92

9.53

17

635

16

10.3

14.00-24, 14.00-25

OTR2624

3086

9.53

11.1

15

716.3

13

11.1

16.00-20, 16.00-21, 17.5-25

OTR2627

3528

9.53

11.1

15

716.3

15

11.1

16.00-24, 16.00-25

OTR2633

3251

9.53

11.1

19

873.8

14

11.1

20.5-25

OTR2636

3528

9.53

11.1

19

873.8

15

11.1

18.00-24, 18.00-25, 18.00-26

OTR2642

4188

9.53

11.1

19

873.8

18

11.1

18.00-33

OTR2645

3650

11.1

13.5

20

1001

15

11.1

23.5-25

OTR2648

3879

11.1

13.5

20

1001

16

11.1

OTR2654

4554

11.1

13.5

20

1001

19

11.1

 

OTR2657

4107

11.1

13.5

23

1133

17

11.1

26.5-25, 30.5R32, 710/70R38, 755/70R25, 800/65R32

OTR2660

4336

11.1

13.5

23

1133

18

11.1

 

OTR2663

4623

11.1

13.5

23

1133

19

11.1

 

OTR2672

4107

11.1

13.5

27

1308

17

11.1

29.5-25

OTR2675

4336

11.1

13.5

27

1308

18

11.1

 
* OPTIONAL: 437" Alloy-235 B.H.N. MIN. or 531" AISI 1008 to 1020.
 

9. Farm Tractor Chains - (FTH-Type) Highway Service(Single mount-SAE class "NOT" Applicable)

item No.

Side Chain

Cross Chain

Hooks

Application

Length

Dia

Dia

Links

Length

Pairs

Dia

FTH0822

2276

7.92

9.53

11

441

11

9.53

8.3-24, 12-16.5, 10.5/80-18, 280/70R20, 300/70R20, 315/75D15

FTH0829

1935

7.92

9.53

11

441

9

9.53

9.5-16, 10.00-16.5, 10-16.5, 260/70R16

FTH0832

2522

7.92

9.53

11

441

12

9.53

7.2-24, 9.5-24, 12.5/80-18

FTH0836

2471

7.92

9.53

14

537

12

10.3

9.5-28, 11.2-24, 15.00-19.5, 355/80R20, 360/70R20, 380/70R20

FTH0838

2860

7.92

9.53

14

537

14

10.3

9.50-32, 11.2-28, 12.4-24, 12.4-28, 230/95R32, 320/85R24

FTH0846

3498

7.92

9.53

14

537

17

10.3

11.2-34, 11.2-36

FTH0862

3741

7.92

9.53

14

537

18

10.3

9.5-36, 9.5-38, 11.2-38, 12.4-36, 12.4-38, 290/90R38

FTH0852

2715

7.92

9.53

14

537

13

10.3

12.4-24, 41-14.00-20, 320/70R24

FTH0856

3058

7.92

9.53

14

537

15

10.3

12.4-28, 230/95R36

FTH0850

2179

7.92

9.53

16

601

10

10.3

13.6-16, 14-17.5

FTH0858

2959

7.92

9.53

16

601

14

10.3

13.6-24, 13.6-26, 380/70R24

FTH0859

3106

7.92

9.53

16

601

15

10.3

13.6-28, 14.9-24, 360/70R28

FTH0866

3838

7.92

9.53

16

601

19

10.3

12.4-40, 12.4-42, 13.6-36, 13.6-38, 270/95R44

FTH0869

3302

7.92

9.53

16

601

16

10.3

14.9-26, 14.9-28

FTH0871

4082

7.92

9.53

16

601

20

10.3

14.9-38

FTH0874

3106

7.92

9.53

19

697

15

10.3

16.9-24, 17.5L-24, 17.5-24, 320/85R38

FTH0876

3350

7.92

9.53

19

697

16

10.3

14.9-30, 16.9-26, 16.9-28, 420/85R28

FTH0877

3498

7.92

9.53

19

697

17

10.3

16.9-30, 380/85R34

FTH0879

3741

7.92

9.53

19

697

18

10.3

15.5-38, 16.9-34

FTH0880

4082

7.92

9.53

19

697

20

10.3

16.9-38

FTH0881

2370

9.53

11.1

17

795

10

11.1

18.4-16.1

FTH0883

3142

9.53

11.1

17

795

13

11.1

18.4-24, 18.4-26, 19.5L-24

FTH0884

3307

9.53

11.1

17

795

14

11.1

18.4-28, 540/65R30, 550/65R25

FTH0885

3528

9.53

11.1

17

795

15

11.1

16.9-30, 18.4-30, 21L-24

FTH0887

3749

9.53

11.1

17

795

16

11.1

18.4-34, 600/65R25

FTH0889

4023

9.53

11.1

17

795

17

11.1

18.4-38

FTH0890

4023

9.53

11.1

19

874

17

11.1

20.8-34

FTH0892

4244

9.53

11.1

19

874

18

11.1

20.8-38

FTH0891

3307

9.53

11.1

22

993

14

11.1

23.1-26

FTH0893

3693

9.53

11.1

22

993

16

11.1

23.1-30

FTH0895

3967

9.53

11.1

22

993

17

11.1

 

FTH0894

 

 

 

 

 

19

 

18.4-42, 14.9-46, 420/80R46

FTH0882

 

 

 

 

 

 

 

21.5-16, 21.5L-16.1

 
10. Cross Chains

Ladder Tractor Cross Chains
(each cross chain includes 2 cross chain hooks)
* case hardened in accordance with ASTM E18 Standards)

Cross Chain Diameter

Number of Links

Length(including hooks)

9.65

11

442.5

9.65

14

537.0

9.65

16

601.0

9.65

19

697.0

11.2

19

874.8

11.2

17

794.8

11.2

22

993.1

Garden Tractor Cross Chains
(each cross chain includes 2 cross chain hooks)
* case hardened in accordance with ASTM E18 Standards)

Cross Chain Diameter

Number of Links

Length (including hooks)

3.7

7

154.0

4.5

7

184.4

5.3

7

258.6

5.3

8

282.0

5.3

9

305.3

5.3

10

328.7

5.3

12

362.7

5.3

12

375.4

5.3

14

422.2

5.3

15

419.1

5.9

6

206.3

5.9

8

282.7

5.9(~6.35)

9

307.9

5.9(~6.35)

10

333.3

5.9(~6.35)

11

358.7

5.9(~6.35)

12

384.1

5.9(~6.35)

13

406.4

5.9(~6.35)

17

508.0

7.1

9

365.0

7.1

10

396.8

7.1

12

460.3

7.9

8

371.4

7.9

9

406.7

7.9

10

432.3

7.9

10

442.0

7.9

11

477.3

7.9

13

547.9

7.9

14

583.2

7.9

15

618.5

7.9(super single)

20

795.0

9.65

11

442.5

9.65

17

635.3

11.2

15

716.0

11.2

19

874.8

13.5

20

1,000

13.5

23

1,133

13.5

27

1,310

Side Chain

Cross Chain Diameter

Pitch(inside length)

Application

3.4

38.1

Small Tractor

4.88

42.4

Small Tractor

5.54

46.5

Truck

7.1

46

Truck

7.9

48.8

Truck

7.9

54

Tractor

9.65

55.1

Tractor / Loader

 

11. TIRE CHAIN SPECIFICATIONS (No. NACM-92805 TC)

National Association of Chain Manufacturers (No. NACM-92805 TC)
These specifications, adopted September 28, 2005, by the National Association of Chain Manufacturers,
supersede and replace specifications No. 81396(TC)

 

TABLE OF CONTENTS

SECTION

SUBJECT

 

1

Scope

1. Scope   2. Classification

2

Applicable Documents

1. specification 2. Standard 3. Other

3

Definitions

1.Side Chain  2.Fasrener  3.Reguar  4.Hooks  5.Pitch

4

Requirements

1. Hardness  2. Case Depth 3. Workmanship

5

Quality Provisions 1. Inspection  2. Hardness  3. Case Depth

6

Notes 1. Intended use

Table 1

NACM Tire Chain Design Component Dimensions

Table 2

Case Depth of Cross Chain Links
This document has been developed by the National Association of Chain Manufacturers (NACM) in accordance with its objectives. NACM, its members, and those participating in its activities shall not incur any obligation or liability for injury or damages, including consequential damages, arising out or in connection with, the use, interpretation of, or reliance on this document. NACM does not inspect, approve, or certify products as complying with the requirements of this document.

National Association of Chain Manufactures Tire Chain Specifications

1

SCOPE

1.1

Scope.
This specification covers ladder type chain assemblies designed for use on tires that have been manufactured in accordance with the standards of the Tire & Rim Associated , Inc.

Tire chain assemblies covered by this specification are intended for use as traction devices on passenger car tires, truck tires (single, dual and wide base), off-the-road service tires, and farm tractor tires. Replacement cross chains and other components are intended for repairing tire chain assemblies only.

All passenger and light truck tire chains are for use on vehicle based on SAE classification. SAE J1232, tration device profile determination and classification and SAE J683A - tire chain clearance ; trucks, buses, and combination of vehicles.

SAE Class "S"

Regular (non reinforced) passenger tire traction devices for vehicles with restricted wheel well clearance.

SAE Class "U"

Regular (non reinforced) and lug reinforced passenger tire traction devices for vehicles with regular (non-restricted) wheel well clearance.

SAE Class "W"

Passenger tire traction devices that use light truck components, as well as some light truck traction device (non-resticted) wheel well clearance.

TYPE

TIRE TREAD FACE

TIRE SIDEWALL

SAE Class "S"

37.1

15

SAE Class "U"

50

23.1

SAE Class "W"

63.5

38.1

The minmum clearances specified must be maintained around fenders, struts, brake lines and braces.

1.2

Classification.
Tire chains described in this specification shall be of the following types as specified.

Reinforced Tire Chains SAE Classification
Type RP - Reinforced Passenger Car Chains Class "U"

Type RS - Reinforced Single Truck Chains

Class "U" or Class " W"

Type RDT - Reinforced Dual-Triple Truck Chains

Class "U" or Class " W"

Regular Tire Chains

Type PL - Passenger Car Chains-Resiricted Clearances

Class "S"

Type SH  - Single Truck Chains

Class "U" and Class " W"

Type SM - Single Truck Chains - Mud Service

Class "W"

Type DTH - Dual Triple Truck Chains

Class "U" or Class " W"

Type DTM - Dual Triple Truck Chains - Mud Service

Class "W"

Type DH - Dual and Wide Base Truck Chains

Class "W"
Type OTR - Off-the-Road Vehicle Chains Not Applicable
Type FTH - Farm Tractor Chains- Highway Service Not Applicable

2

APPLICABLE DOCUMENTS

2.1

The following documents, of the issue in effect on date of manufactuer, form a part of this specification to the extent specified herein.

SPECIFICTIONS:
NACM-TC SHEETS TC 1-01 to TC 9-02-NACM Tire Chain Specifications Sheets

STANDARDS:
ASTM-ASTM E18-Standard Test Method for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials.

OTHER:
SAE J1232- Passenger and Light Truck Tire Chain Traction Device Profile Determination & Classification.
SAE J683A- Tire Chain Clearance - Trucks, Buses(Except Suburban, Intercity and Transit Buses), and Combinations of Vehicles

3

DEFINITIONS

3.1

For purposes of this specification the following definitions shall apply.

3.2

Side Chain.
Straight link, welded chain of specified length to complete one full circumference along the tire side wall.

3.3

Fasrener.
Any suitable connecting device, secured to one end of a side chain, so constructed that it can be easily closed(engaged or fastened)

3.4

3.4.1 Reinforced.
Twist link, welded chain, carburized, with one or more reinforcements per link consisting of a lug, or lugs, electrically welded to all links except the end links in such a manner as to provide increased traction and additional resistance to abrasive wear.
Cross chains shall be of the specified length and shall provide ample drape over the tire tread.

3.4.2. Reguar.
Twist link, welded chain, carburized, without reinforcement.
Cross chains shall be of the specified length and shall prdvide ample drape over the tire tread.

3.5

Cross Chain Hooks.
Hook used to attach each cross chain to the side chains.
Hooks shall be consructed and assembled to prevent accidental detachments.

3.6

Pitch.
The measured inside length of a chain component (bearing point to bearing point when in use)

4

REQUIREMENTS

4.1

Components.   
Tire chain assemblies shall consist of two side chains, or two outer-and one inner-side chain, with cross chains, cross chain hooks, and fasteners necessary to from a complete assembly in accordance with the NACM TC SHEETS specified herein.(see 2.1)

4.2

Material.  
All side and cross chains and cross chain hooks shall be made of open hearth, electric furnance, or basic oxygen process steel.

4.3

Spacing of Cross Chains.  
The number of cross chains required per half pair of chains shall be in accordance with the most current applicable NACM TC SHEETS.
The first cross chain shall be attached to that link of each side chain nearest the fastener that will permit the fastener to lie in the proper plane when the assembled tire chain is applied to the tire.
On single tire chains the remainder of the cross chains shall be attached to the side chains at equal intervals of four links each.
On dual-triple tire chains the remainder of the cross chains shall be attached to the outer side chains at equal intervals of four links each, and the inner side chain with opposing cross chains staggered at equal intervals of two links each.

4.4

Tolerances.
 
4.4.1. Cross Chain Length.  
The number of links shall be as specified in applicable TC sheets.
See Table 1 for link specifications.

4.4.2. Side Chain Length.
The inside length of all side chains, including their end hooks or closed fasteners, shall be long enough for proper placement of all cross (tag or free) links on end. See Table 1 for link specifications.

4.4.3. Wire and Rod Sizes.
Wire and rod sizes shall be subject to the following tolerance:
Material up to and including 4.88mm diameter - plus or minus 0.08mm.
Material over 4.88mm diameter - plus or minus 0.41mm.

4.5

Component Dimensions.
The tire chain component dimensions, used for design purposes by the NACM, are shown in Table 1.  The dimensions of manufactured components may vary but the assembled tire chains must meet the tolerances specified in paragraphs 4.4.1, 4.4.2, and 4.4.3.

TABLE 1

NACM Tire Chain Design Component Dimensions

Type Component

Nominal Wire Dia

Pitch ± 3%

Side Chain

4.11

31.75

4.50

31.75

4.88

32.92

5.54

35.31

7.14

46.02

7.92

48.79

9.53

55.17

11.1

57.15

Cross Chain

4.5

29.97

5.26

23.37

5.94

25.40

7.14

31.75

7.92

35.31

9.53

32.00

11.1

39.67

13.49

44.04

C.C. Hook

4.5

26.92

5.26

47.50

6.35

39.62

7.92

39.62

9.53

44.45

10.31

44.45

11.1

60.20

4.6

Finish.
Type RP, P, and PL shall have a rust resistant finish for protection in transit and storage.
All othe types shall be types shall be finished in accordance with individual manufacturer's practice.

4.7

Physical Properties

4.7.1. Hardness.
The surface hardness of cross chain shall be determined in accordance with ASTM E18 Standard Test Methods for Rockwell Hardness and shall meet one of the following levels of measurement: RC 53 min., RA 77.5 min., R15N 87 min.,  R30N 71 min., R45N 58.5 min.

4.7.2. Case Depth.
The case depth of cross chain shall be as specified in Table 2.

TABLE 2

CASE DEPTH OF CROSS CHAIN LINKS

Nominal Wire Dia.

Total Case Depth

minimum

maximum

4.50

.05

1.07

5.26

.30

1.14

5.94

.41

1.17

7.14

.51

1.27

7.92

.56

1.32

9.53

.69

1.52

11.1

.69

1.65

13.5

.69

1.65

4.7.3. Workmanship. Workmanship shall be such as to produce chain assemblies free from scale, injurious defects such as burrs or sharp edges, and faulty welding.

5

QUALITY PROVISIONS

5.1

Responsibility for Inspection.  Unless otherwise specified, the supplier / maunfacturer is responsible for all inspection and quality assurance that the products meet this specification listed herein.

5.2

Test Procedures.

5.2.1 Hardness. To determine conformance to 4.7.1, cross chain shall be subject to the Rockwell hardness test as specified in the ASTM E18 Standard Test Methods for Rockwell Hardness.

5.2.2. Case Depth. Cross chain link shall be sectioned perpendicular to the axis of the chain wire. The test specimen shall be etched in a solution of one part nitric acid and one part water by volume until suitable case ring is present. Width of dark ring revealed shall be measured microscopically at suitable magnification and recorded as depth of case.

6

NOTES

6.1

Intended Use.  Tire chain assemblies covered by this specification are intended for use as traction devices on passenger car tires, truck tires (single, dual and wide base), off-the-road service tires, and farm tractor tires. Replacement cross chains and other components are intended for repairing tire chain assemblies only tire chain assemblies or components shall not be used for overhead lifting, towing, or load securement.

6.2

For information about which tire chains should be used on specific tire sizes, refer to catalogs of tire chain manufacturers.
 

Standards for Tire Chains. (WAC 204-24-020 )

(1) Link tire chains must meet the National Association of Chain Manufacturers Tire Chain Specifications NACM-5179(TC). 

(2) Cable tire chains must be designed for use on tires mounted in accordance with specifications in Society of Automotive Engineers (SAE) Recommended Practice J1232, Class S, and SAE Informational Report J683a. Oversized tires, snow tires, special service, or special traction tires, etc.,
may require chains of a larger size.


(a)
Classifications. Cable tire chains described in this specification must be of the following types as specified for regular and restricted clearances:
  (i) Passenger car; 
  (ii) Single light truck; 
  (iii) Heavy truck; 
  (iv) Special police and emergency vehicle.


(b)
Requirements:

[1] Components.

Cable tire chain assemblies must consist of two side cables, or two outer and one inner side cable, with reinforced cross cables, cross cable fastener, and fasteners necessary to form a complete assembly.

[2] Material.

(A)
Stranded side and stranded cross cable wire must be constructed of preformed galvanized high-carbon steel with a minimum of 204 Kg breaking strength with seven wires per strand and seven strands per cable. The lay must be a right hand lay.

(B)
Wire covering stranded cable must be constructed of high-carbon plow steel wire with a minimum tensile strength of 104.3 Ton per square inch.

(C) Spring wire covering stranded cable must be constructed of harddrawn spring wire with a minimum tensile strength of 90.7 Ton per square inch.


(D)
Cables, spring, and plow wire must be manufactured in conformance to SAE Recommended Practice J113.

(E)
Cross cable fasteners must be constructed of open hearth, electric furnace, or basic oxygen process steel. 

(F)
Metallic cross cable traction reinforcement sleeves must be constructed of open hearth, electric furnace, or basic oxygen process steel and shall comply with the following American Society for Testing Materials (ASTM) standards: Standard E6 - Bend Test, Standard E8 - Tension Test, Standard E18 - Test Methods for Rockwell Hardness, and Standard A568 - Table of Chemical Content of Steel.

(G)
Nonmetallic cross cable traction reinforcement sleeves shall be constructed of "Zytel" ST-801 nylon or its equivalent.

[3] Spacing of cross cable.

The first cross cable must be attached to that point of each side cable nearest the fastener that will permit the fastener to lie in the proper plane when the assembled cable tire chain is applied to the tire. On single cable tire chains, the remainder of the cross cables must be attached to the side cable at intervals designed to provide for at least one cross cable in contact with the roadway at all times. On dual-triple tire chains, the remainder of the cross cable shall be attached to the outer side cables at like intervals and to the inner side chain with opposing cross cables staggered at the same intervals.

[4] Tolerances.

(A) Cross cable length. The inside length of all cross cable, including fasteners held in the same plane, must be within a tolerance of minus 1/8 inch to plus 1/8 inch of the specified length indicated by the chain manufacturer's specifications. The length shall be measured by hanging the cross cable vertically on a horizontal pin and measuring the inside to inside length. The number of traction reinforcement sleeves in a cross cable may not vary from the number specified by the manufacturer.

(B) Side cable length
.
The length of all side cables must be within tolerance of minus 3.3mm to plus 12.7mm of the length indicated by the chain manufacturer's specifications.

(C) Stranded cable size
.
Stranded cable size must be subject to the following tolerances:

(a) Material up to and including 2.4 mm diameter shall not be less than the designated diameter and shall not exceed 0.25 mm over the specified diameter.

(b) Material over 2.4 mm diameter shall not be less than the specified diameter and shall not exceed 0.36 mm over the specified diameter.


(D) Component dimensions
.
The dimensions of manufactured components may vary, but the assembled cable chains must meet the tolerances specified in (b)(iv)(A), (B), and (C) of this subsection.

(E) Finish
.
All cable tire chains must have a rust-resistant finish for protection in transit and storage.

(F) Identification
.
Each half set of cable tire chains must be permanently marked with the manufacturing company's name, initials or trademark in order that it may be easily identified when not in the original container.

Standards for Studded Tire Chains. (WAC 204-24-030 )

Studded tires must meet the following specifications:

(1)
Studs must be metal, tipped with tungsten carbide.

(2) Metal studs must be inserted only in a new tire or a newly-recapped tire which has molded in the tread the "pin-holes" into which metal studs are to be inserted. Studs must not be inserted in any new tire or newly-recapped tire after it has been driven on a vehicle.

(3) Metal studs may be installed only by the tire manufacturer, or by a tire dealer or tire jobber who shall install the metal studs in conformance with the manufacturer's specifications.

(4) When a tire is sold or offered for sale as a studded tire or when studs are installed in a new tire or a newly recapped tire, there must be a minimum of seventy metal studs evenly spaced around the tread of the tire.

(5) A tire must contain a minimum of fifty-six metal studs at all times in order to qualify as a "studded tire" or as an approved traction device.

(6) Metal studs must not be installed in any tire of a vehicle which has a gross vehicle weight of ten thousand pounds or over.

(7) School buses and fire department equipment tires are exempt from subsection (6) of this section.

 

Specifications: Tires Chains & Accessories

Minimum Specifications Called For:

[1]
Tire chains and accessories shall be in compliance to “Requirements of (NACM) 92805(TC) dated September 28, 2005, Sections 4.1 through 4.73, and Tables I, and II.

[2] Tire chains and accessories shall be in compliance to the “Quality Provisions as specified in NACM92805(TC), Sections 5-5.2.2 and Standards ASTM E18 Standard Method for Rockwell Hardness Test.

Additional Requirements: 
Bidder in addition to compliance of (1). Requirements & (2). Quality Provisions above will complete the applicable Product Group below for Product Group “B” and/or Product Group “C”.

PRODUCT GROUP “B”

Chains, Heavy Equipment, “European Style” Case - Hardened Alloy steel, Galvanized, full reversible, RUD BISON/SUPER GREIFSTEG Series tires or equal

B.1 Core Hardness – Minimum 39 HRC Rockwell
B.2 Case Depth Harness – Minimum .1d  (Diameter of Links)
B.3 Surface Hardness – Minimum 63.5 Rockwell, “C”
B.4 Resistant to breaks against temperatures down to –50 degrees C = -58 degrees F.
B.5 Bars – Bars must be designed in such a manner that they do not cause damage to bare pavement surface
B.6 Chains to be mesh type, made of short links in order to provide maximum road contact
B.7 Chains shall have tensioning chain for ease of adjustment in accordance with tire pressure and road conditions, and shall be held in place with heavy ring guides.
B.8 An outside tensioning chain shall be required on all chains with a suitable locking device.
B.9 Link sizes to be available in sizes 7mm to 11mm
B.10 Chains must be full reversible, worn on both sides to provide maximum miles of use

PRODUCT GROUP “C”

Chains, Heavy Equipment, “European Style” Nickel Magnesium Alloy steel Galvanized, Full reversible, PEWAG Universal Series or equal.

C.1 Core Hardness – Minimum 39.HRC Rockwell
C.2 Depth Of Harness – Minimum 6% (Diameter of Links)
C.3 Surface Hardness – Minimum 61 Rockwell, “C”
C.4 Resistant to breaks against temperatures down to –50 degrees C = -58 degrees F.
C.5 Bars – Bars must be designed in such a manner that they do not cause damage to bare pavement surface
C.6 The chain will have welded wear bars covering the entire diamond pattern and the connecting links of the diamond.
C.7 All diamond patterns shall be connected to the side chain with welded rings (Hooks are not acceptable)
C.8 Chains shall have tensioning chain for ease of adjustment in accordance with tire pressure and road conditions, and shall be held in place with welded    ring guides.
C.9 An outside tensioning chain shall be required on all chains with a suitable locking device.
C.10 Link sizes to be available in sizes 4.5mm to 12mm
C.11 Chains must be designed to be full reversible, worn on both sides to provide maximum miles of use

♣ OH SUNG Chain Co.
Please feel free to call: 02-896-5656 or Fax: 02-896-5659  or contact us via e-mail (8965656@hanmail.net)
so our company can help you obtain the correct equipment for your applications.

 

 
Copyrightⓒ OSC Corp. All Rights Reserved.